IOS-XE升级与许可注册¶
[思科] IOS升级 (IOS-XE)以及注册许可¶
[思科] IOS升级 (IOS-XE)以及注册许可
- 将镜像文件拷贝至U盘。
- 将U盘插到思科路由器上,Console会输出如下内容。

- dir usb1:检视文件,检查目标版本镜像是否存在。

- 执行复制命令,将镜像文件拷贝至思科路由器文件系统。

- 设置启动加载目标镜像并保存,然后重启设备。
Router#conf t
Router(config)#boot system bootflash:isr4400-universalk9.16.08.01.SPA.bin
Router(config)#end
Router#write
Router#reload
Proceed with reload? [confirm]
- show version查看是否升级成功。

- [可选] 如果版本小于等于16.09,通过show license udi获取UDI,提供给供应商拿许可文件。

- [可选] PM从采购部拿到许可文件后,会给到我部门做许可注入。

- 将许可文件下载后,上载到U盘中,然后将U盘插入设备接口。如下示例安装了SEC和HSEC许可。
Router#
*Nov 4 03:32:48.616: %IOSD_INFRA-6-IFS_DEVICE_OIR: Device usb0 added
Router#dir usb0:
Directory of usb0:/
3 drwx 32768 Nov 4 2024 11:31:56 +00:00 .Spotlight-V100
4 drwx 32768 Nov 4 2024 11:31:56 +00:00 .fseventsd
5 -rwx 1155 Nov 4 2024 11:20:02 +00:00 SERIAL_PLACEHOLDER_SEC.lic
6 -rwx 4096 Nov 4 2024 11:32:26 +00:00 ._SERIAL_PLACEHOLDER_SEC.lic
7 -rwx 1148 Nov 4 2024 11:20:02 +00:00 SERIAL_PLACEHOLDER_HSEC.lic
8 -rwx 4096 Nov 4 2024 11:32:26 +00:00 ._SERIAL_PLACEHOLDER_HSEC.lic
Router#copy usb0:SERIAL_PLACEHOLDER_perf.lic bootflash:-----把license从U盘copy到设备
Destination filename [SERIAL_PLACEHOLDER_perf.lic]?
Copy in progress...C-------直接回车
1155 bytes copied in 0.032 secs (36094 bytes/sec)
Router#dir
Directory of bootflash:/
11 drwx 16384 Dec 18 2018 11:39:21 +08:00 lost+found
321281 drwx 4096 Jan 31 2023 20:19:19 +08:00 .prst_sync
12 -rw- 486645440 Dec 18 2018 11:48:35 +08:00 isr4300-universalk9.03.16.04b.S.155-3.S4b-ext.SPA.bin
16065 drwx 4096 Dec 18 2018 11:40:21 +08:00 .installer
80321 drwx 4096 Dec 18 2018 12:00:02 +08:00 core
112449 drwx 4096 Dec 18 2018 11:58:32 +08:00 .rollback_timer
13 -rw- 0 Dec 18 2018 11:58:42 +08:00 tracelogs.745
289153 drwx 8192 Nov 16 2024 15:48:09 +08:00 tracelogs
14 -rw- 30 Oct 21 2023 11:27:17 +08:00 throughput_monitor_params
15 -rw- 656 Oct 21 2023 10:48:38 +08:00 vlan.dat
16 -rw- 1155 Nov 27 2024 19:15:04 +08:00 SERIAL_PLACEHOLDER_perf.lic
Router#license install bootflash:SERIAL_PLACEHOLDER_SEC.lic
Installing licenses from "bootflash:SERIAL_PLACEHOLDER_SEC.lic"
Installing...Feature:securityk9...Successful:Supported
1/1 licenses were successfully installed
0/1 licenses were existing licenses
0/1 licenses were failed to install
*Nov 4 03:34:37.869: %LICENSE-6-INSTALL: Feature securityk9 1.0 was installed in this device. UDI=ISR4451-X/K9:<已脱敏>; StoreIndex=2:Primary License Storage
*Nov 4 03:34:37.875: %IOS_LICENSE_IMAGE_APPLICATION-6-LICENSE_LEVEL: Module name = esg Next reboot level = securityk9 and License = securityk9
Router#license install bootflash:SERIAL_PLACEHOLDER_HSEC.lic
Installing licenses from "bootflash:SERIAL_PLACEHOLDER_HSEC.lic"
Installing...Feature:hseck9...Successful:Supported
1/1 licenses were successfully installed
0/1 licenses were existing licenses
0/1 licenses were failed to install
*Nov 4 03:34:54.520: %LICENSE-6-INSTALL: Feature hseck9 1.0 was installed in this device. UDI=ISR4451-X/K9:<已脱敏>; StoreIndex=3:Primary License Storage
- 验证许可被成功应用。
Router#show license
Index 3 Feature: securityk9
Period left: Life time
License Type: Permanent
License State: Active, Not in Use //重启后会显示In Use
License Count: Non-Counted
License Priority: Medium
Index 8 Feature: hseck9
Period left: Life time
License Type: Permanent
License State: Active, Not in Use //重启后会显示In Use
License Count: Non-Counted
License Priority: Medium